fredww  
الجنس : 
عدد المساهمات : 76
العمر : 63
 | SRT 7300 CI+ - v 2.29 - 14/05/34 |
| SRT 7300 CI+ - v 2.29 - 14/05/34
هو جهاز استقبال الأقمار الصناعية HD متفوقة للبرامج الحرة إلى الجو والتلفزيون المدفوع عبر CI لها + فتحة متوافقة. القائمة OSD الجديد هو سهل التنقل ومباريات تجربتك HD تماما. مع موصل HDMI لالراقية A / V، USB لتسجيل وتشغيل الأحداث المفضلة لديك وCI + فتحة قبول مجموعة واسعة من وCAM بما في ذلك أحدث وحدات + CI، انها تنوعا حقا!
ContentsDear customer!
Here you can download the new software for your receiver. Please uncompress the downloaded zip file and read the included instructions carefully before you load the firmware into your receiver! The zip file consists of:
1) Firmware Folder: SRT7300_v2.29
2) Release notes
3) Update Instruction:
a) At the PC:
Copy the software files of the “SRT7300_v2.29” folder into the ROOT directory of the connected USB device (please do not copy the folder, just copy the software files inside this folder!). Then disconnect the USB device from the PC and connect it to the receiver.
b) At the Receiver:
After the USB device has been detected successfully, you can perform the software update according to the following steps:
1. Press the MENU button to enter Main Menu. Select Advanced with the "< >" buttons and choose USB Update with the "up/down" buttons then press OKto enter the menu.
2. Within the USB Update menu the message "USB Device is ready” will be displayed. Then use the RED button on your remote control to perform the Upgrade. The Software Upgrade progress will be shown.
PLEASE WAIT until this process is finished!Release NotesSW version 2.29 from 21.02.2013:
Following improvements were realised since the last SW version:
- TP Database for some satellites updated.
- Preinstalled channel list for Austria was actualised.AttentionNEVER disconnect the USB device from the receiver, the receiver from the main or switch the power OFF during the update procedure. It can damage your receiver and warranty will void! As soon as the update has been finished, the receiver restarts automatically!
With the download of this software you confirm, that any risk of usage shall not be passed to STRONG!
Download
Software
3/26/2013 SRT 7300 CI+
http://www.strong.tv/en/products/receivers/satellite/high-definition/srt-7300ci-plus?tab=3#
| |
|
منتديات مملكة الفرات 
منتديات مملكة الفرات 
